1Boiler and pressure vessels inspection

(Fabrication, Design Review and Calculation)

2Function Test

(Cranes, Passenger Hoists and Material Hoists)

3Magnetic Testing

Use magnetic fields and small magnetic particles.

4Penetrant Testing

Used to reveal surface breaking flaws by bleed out fluorescent dye.

5Abseiling (IRATA/NACE)

Applies practical ropework to allow workers to access difficult-to-reach locations without using scaffolding.

6Piping and Structural Steels Inspection

7Tank Inspection (FFS)

8Welders Qualification Test (WQT)

9Plant Shutdown Inspection (RBI)

10Renew & Register PMT/PMA

11Ultrasonic Testing

High frequency sound energy to conduct examination & make measurements.

12Eddy Current Testing

Detect surfaces & slighly sub-surface breaking flaw without removing coating.

13Eddy Current Tube

14Positive Material Identification (PMI)

Analysis of materials to determine the chemical composition of a metal or alloy.

15Phased Array Ultrasonic Testing

To inspect more complex geometry that are difficult.

16Hardness Testing

To determines wheather are material or material treatment is suitable for the purpose you require.

17Radiographic Testing

Technique that involves the use of either X-ray or Gamma-ray to view the internal strucure.

18Holiday Test

Apply on protective coating to detect unacceptable to discontinuous.